Author Topic: Trolling Fin  (Read 1763 times)

horsehunter

  • 30 Pounder
  • ****
  • Posts: 485
  • Gender: Male
Trolling Fin
« on: July 04, 2020, 09:13:48 pm »
Aluminum Fin for bottom of 24volt Terova Ipilot ( Game Changer ). For people who use thrust from kicker and steer with Ipilot. Fin allows steering with Ipilot using very minimal thrust and battery use from Terova . Two available $125 located in Tweed but I get around

Text 343 263 9920
I love golf it keeps thousands of unworthy off the water.

SpoonPullers.com

  • Advertisement
  • *****

SPOONTANG

  • Shaker
  • **
  • Posts: 34
  • Gender: Male
Re: Trolling Fin
« Reply #1 on: July 05, 2020, 09:34:58 pm »
Brilliant. What a great idea. I love it.

horsehunter

  • 30 Pounder
  • ****
  • Posts: 485
  • Gender: Male
Re: Trolling Fin
« Reply #2 on: July 10, 2020, 01:07:31 pm »
I had a few calls on these GAME CHANGERS but they only fit the 24 volt Terovas
I love golf it keeps thousands of unworthy off the water.

horsehunter

  • 30 Pounder
  • ****
  • Posts: 485
  • Gender: Male
Re: Trolling Fin
« Reply #3 on: July 17, 2020, 08:55:55 am »
ttt
I will have 1 or 2 available at Bluffers Mon.20th and Tue.21st
Text 343 263 9920
I love golf it keeps thousands of unworthy off the water.

Axel

  • Smolt
  • *
  • Posts: 1
Re: Trolling Fin
« Reply #4 on: July 17, 2020, 10:49:03 am »
I purchased one and it works great. I went from power 6.5 to mostly 3 and depending on conditions Iíve ran it with no prop propulsion. Much better control in rough water also. 👍

Deep Meat

  • 24 Pounder
  • ***
  • Posts: 139
Re: Trolling Fin
« Reply #5 on: July 17, 2020, 05:47:56 pm »
Is the 36v a different size??

horsehunter

  • 30 Pounder
  • ****
  • Posts: 485
  • Gender: Male
Re: Trolling Fin
« Reply #6 on: July 17, 2020, 05:58:35 pm »
I'm guessing the 36 volt motor would be a larger diameter the 24 volt is 4 inches
I love golf it keeps thousands of unworthy off the water.

trophycraft

  • 30 Pounder
  • ****
  • Posts: 408
  • Gender: Male
  • Kevin
Re: Trolling Fin
« Reply #7 on: July 17, 2020, 08:55:49 pm »
Genius! Awesome idea!

John S.

  • Shaker
  • **
  • Posts: 21
  • Gender: Male
Re: Trolling Fin
« Reply #8 on: July 20, 2020, 08:57:05 pm »
I'm guessing the 36 volt motor would be a larger diameter the 24 volt is 4 inches

The 36 volt Ultrex is 4-1/2" od.

westlakecharlie

  • Shaker
  • **
  • Posts: 83
  • Gender: Male
Re: Trolling Fin
« Reply #9 on: July 21, 2020, 02:01:48 am »
Wonít fit motorguide?


Sent from my iPhone using Tapatalk

horsehunter

  • 30 Pounder
  • ****
  • Posts: 485
  • Gender: Male
Re: Trolling Fin
« Reply #10 on: July 21, 2020, 05:18:47 pm »
No it's notched to match the fin on a 24 volt Terova
I love golf it keeps thousands of unworthy off the water.

quickfish4me

  • 24 Pounder
  • ***
  • Posts: 176
  • Gender: Male
Re: Trolling Fin
« Reply #11 on: July 21, 2020, 06:35:34 pm »
I am sure you could get one made at any shop that deals in aluminum stock.

John S.

  • Shaker
  • **
  • Posts: 21
  • Gender: Male
Re: Trolling Fin
« Reply #12 on: July 22, 2020, 06:31:30 pm »
Horsehunter, you had a fantastic idea to address a problem which plagues many fisherman. You should get a manufacturer to mass produce a dozen or so for each diameter size bow mount electrics because guys like me will copy your idea, flattering your inventiveness. Thank you for the idea. Here's my Ultrex copy.

wilbur

  • Shaker
  • **
  • Posts: 35
Re: Trolling Fin
« Reply #13 on: July 22, 2020, 09:33:40 pm »
Great idea! You may have to make some adjustments as well for the new terrovas with the mega imaging. They have made the transducer larger

SHORTnFAT

  • 30 Pounder
  • ****
  • Posts: 344
  • Gender: Male
Re: Trolling Fin
« Reply #14 on: July 22, 2020, 11:02:39 pm »
I am sure you could get one made at any shop that deals in aluminum stock.
Not for $125!