I use the Scotty sure stop set up now but I make them myself with the correct tools and connectors, never had a failure, but I lost 2 with the straight Scotty set, likely my fault though. That said, I firmly believe in the Klincher ran them for years and always have them on board in case I need a fast swap, guaranteed safe. But I did not know Cannon made them as well, may have to check them out too. Only thing is with the Klincher, and maybe the Cannon, if you run a Depth Raider, you need to ground bare cable to the Klincher itself, but there are videos on how to do it, non issue if you don’t run a Depth Raider