Community Center => Buy & Sell => Topic started by: horsehunter on July 04, 2020, 09:13:48 pm
Title: Trolling Fin
Post by: horsehunter on July 04, 2020, 09:13:48 pm
Aluminum Fin for bottom of 24volt Terova Ipilot ( Game Changer ). For people who use thrust from kicker and steer with Ipilot. Fin allows steering with Ipilot using very minimal thrust and battery use from Terova . Two available $125 located in Tweed but I get around
Text 343 263 9920
Title: Re: Trolling Fin
Post by: SPOONTANG on July 05, 2020, 09:34:58 pm
Brilliant. What a great idea. I love it.
Title: Re: Trolling Fin
Post by: horsehunter on July 10, 2020, 01:07:31 pm
I had a few calls on these GAME CHANGERS but they only fit the 24 volt Terovas
Title: Re: Trolling Fin
Post by: horsehunter on July 17, 2020, 08:55:55 am
ttt I will have 1 or 2 available at Bluffers Mon.20th and Tue.21st Text 343 263 9920
Title: Re: Trolling Fin
Post by: Axel on July 17, 2020, 10:49:03 am
I purchased one and it works great. I went from power 6.5 to mostly 3 and depending on conditions I’ve ran it with no prop propulsion. Much better control in rough water also. 👍
Title: Re: Trolling Fin
Post by: Deep Meat on July 17, 2020, 05:47:56 pm
Is the 36v a different size??
Title: Re: Trolling Fin
Post by: horsehunter on July 17, 2020, 05:58:35 pm
I'm guessing the 36 volt motor would be a larger diameter the 24 volt is 4 inches
Title: Re: Trolling Fin
Post by: trophycraft on July 17, 2020, 08:55:49 pm
Genius! Awesome idea!
Title: Re: Trolling Fin
Post by: John S. on July 20, 2020, 08:57:05 pm
I'm guessing the 36 volt motor would be a larger diameter the 24 volt is 4 inches
The 36 volt Ultrex is 4-1/2" od.
Title: Re: Trolling Fin
Post by: westlakecharlie on July 21, 2020, 02:01:48 am
Won’t fit motorguide?
Sent from my iPhone using Tapatalk
Title: Re: Trolling Fin
Post by: horsehunter on July 21, 2020, 05:18:47 pm
No it's notched to match the fin on a 24 volt Terova
Title: Re: Trolling Fin
Post by: quickfish4me on July 21, 2020, 06:35:34 pm
I am sure you could get one made at any shop that deals in aluminum stock.
Title: Re: Trolling Fin
Post by: John S. on July 22, 2020, 06:31:30 pm
Horsehunter, you had a fantastic idea to address a problem which plagues many fisherman. You should get a manufacturer to mass produce a dozen or so for each diameter size bow mount electrics because guys like me will copy your idea, flattering your inventiveness. Thank you for the idea. Here's my Ultrex copy.
Title: Re: Trolling Fin
Post by: wilbur on July 22, 2020, 09:33:40 pm
Great idea! You may have to make some adjustments as well for the new terrovas with the mega imaging. They have made the transducer larger
Title: Re: Trolling Fin
Post by: SHORTnFAT on July 22, 2020, 11:02:39 pm